You need to specify the column widths.
FUSO Produktbild Canter 7C15 Eco Hybrid

Canter 7C15 Eco Hybrid

The Fuso Canter EcoHybrid creates the squaring of the circle: high-tech that protects the environment and pays off. Made for your everyday life - inner-city delivery traffic and environmentally sensitive zones. At an attractive purchase price, which pays for itself within a few years. With its powerful engine, the Canter not only reduces fuel consumption by up to 23 % while driving, it also gains energy while braking. That really saves money. And emissions. The Canter EcoHybrid is the transporter of the future.

You need to specify the column widths.
You need to specify the column widths.
Model Vehicle model 7C15
Cab type / crew Comfort, single cab / 3
Model variant 46836522 46836722
Wheelbase 3400 3850
Overall length 5935 6685
Cab length 1625
Width overall 2025
Cab width 1995
Height overall 2190
Track width Front / rear 1665 / 1560
Frame height (at end of frame) 830
Ground clearance 185
Cab to rear axle 2875 3325
Cab to end of frame 4270 5020
Max. body length** 4985 5725
Frame width 750
Front overhang 1140
Rear overhang 1395 1695
Front axle to front of body 625
Recommended distance cab to body 100
Empty weight* 2695 2710
Front* / rear* 1745/950 1750/960
Minimum vehicle weight 2800
Gross vehicle weight / gross combination weight 7490 / 10990
Axle loads Front / rear 3100 / 5990
Towed weight Braked / unbraked 3500 / 750
Chassis load bearing capacity 4805 4790
Max. speed km/h 130
Max. climbing ability (tan q)% 29,5
Min. turning circle (m) Kerb to kerb 12,2 13,8
Wall to wall 13,8 15,2


* including coolant, oil, 90% fuel, tyre sealant, tools and driver weighing 75 kg; ** calculated maximum value. Should be checked depending on the body installed and the particular application

Subject to change without notice. The information in this data sheet should be considered approximate. The illustrations may show accessories and special equipment not part of the standard specification. This data sheet may also contain models and

support services not available in certain countries.


FUSO Canter 7c15 Eco

You need to specify the column widths.
Electric motor Type Permanent-magnet three-phase synchronous motor
Battery Type Lithium-ion
Voltage / capacity 270 Volt / 2 kWh
Cooling Electric motor Automatic transmission fluid
Battery / inverter Air / water
Water-cooled four-stroke diesel engine with turbocharger, intercooler and direct injection
No. of cylinders
2998 cc
Peak output
110 kW (150 hp) / 3500 rpm
Rated torque
370 Nm / 1320 rpm
Diesel particulate filter
Service life approx. 300,000 km
Alternating current 12V, 140A
Exhaust gas aftertreatment
Fuel consumption Total Dependent on chassis equipment and installed bodies
Emissions Total Dependent on reference dimension
PTO (optional) Type 31 kW with flange 31 kW for directly connected pumps
Torque at peak output [Nm] 196 Nm
Gear ratios 1:0,655 1:0,644
Engine speed at peak output 1500 rpm
Transmission Model DUONIC ® 2.0: Automated transmission with dual clutch, 6 forward speeds and 1 reverse gear
Gear ratio 5.397 - 3.788 - 2.310 - 1.474 - 1.000 - 0.701 Rev. 5.397
Final reduction gear Ratio 4,875
Front axle / rear axle Model F350T / R035T
Load Capacity 3100 kg / 6000 kg
Tyres 205/75R17.5C 124/122 M
Single tyres at front, twin tyres at rear, tyres with optimised rolling resistance
Wheel 17.5 x 6.00 - 127 - 9t - 6 wheel bolts
Steering LHD
Recirculating-ball steering with power assist, tilting telescopic steering column with steering-wheel lock
Brake Service brake Hydraulic with vacuum power assist, dual-circuit with load-dependent brake proportioning valve at rear wheels
Front / rear Disc brake (252 x 40)
Parking brake Mechanical expanding brake on drive shaft at rear of transmission
Auxiliary brake Exhaust brake (50 kW)
Suspension Front / rear Semi-elliptic leaf spring with shock absorber
Frame Type Ladder-type frame with reinforcements and crossmembers
Fuel tank capacity 100 litres
Electrical system – batteries 12 V olt (100AH-760A(EN))

Download PDF