You need to specify the column widths.
FUSO Produktbild Canter 6C18D 4x4

CANTER 6C18D 4X4

With the new Canter 4×4 it's like in real life: you're happy when you're upwardly mobile! Because in challenging terrain the all-wheel drive assists you with powerful traction to make good headway. The tremendous slope climbing ability, the high ground clearance and the high payload and axle loads do much to make the Canter 4×4 a model of flexibility.


You need to specify the column widths.
You need to specify the column widths.
Dimensions
Model Vehicle model 6C18D 4x4
Cab type / crew Comfort, crew cab / 7
Model variant 46833514 46833714
FUSO Modelcode FGB71EL6WEU4 FGB71GL6WEU4
DIMENSIONS mm
Wheelbase 3415 3865
Overall length 5935 6685
Cab length 2625
Width overall 2025
Cab width 1995
Height overall 2495 2490
Track width Front / rear 1665 / 1560
Frame height (at end of frame) 890 835
Cab to rear axle 1890 2340
Cab to end of frame 3285 4035
Max. body length** 4005 4750
Frame width 750
Front overhang 1125
Rear overhang 1395 1695
Front axle to front of body 1625
Recommended distance cab to body 100
WEIGHTS kg
Empty weight* 3035 3055
Front* / rear* 1990/1045 2015/1040
Minimum vehicle weight 3100
Gross vehicle weight / gross combination weight 6500 / 10000
Axle loads Front / rear 2800 / 6000
Towed weight Braked / unbraked 3500 / 750
Chassis load bearing capacity 3465 3445
CALCULATED OUTPUT
Max. speed km/h 130
Max. climbing ability (tan q)% 60
Min. turning circle (m) Kerb to kerb 13,5 15,1
Wall to wall 14,9 16,5
GROUND CLEARANCES AND APPROACH/DEPARTURE ANGLES
Ground clearance under axles Front / rear 210 / 185
Approach angle 35°
Departure angle 25°

 

* including coolant, oil, 90% fuel, tyre sealant, tools and driver weighing 75 kg; ** calculated maximum value. Should be checked depending on the body installed and the particular application

Subject to change without notice. The information in this data sheet should be considered approximate. The illustrations may show accessories and special equipment not part of the standard specification. This data sheet may also contain models and

support services not available in certain countries.

 

 

FUSO Canter 6c18D 4x4

You need to specify the column widths.
Engine/Drivetrain/Chassis
ENGINE (Euro VI)
Type
Water-cooled four-stroke diesel engine with turbocharger, intercooler and direct injection
No. of cylinders
4/in-line
Capacity
2998 cc
Peak output
129 kW (175 hp) / 3500 rpm
Rated torque
430 Nm / 1600 rpm
Diesel particulate filter
Service life approx. 300,000 km
Alternator
Alternating current 12V, 140A
Exhaust gas aftertreatment
DPF + SCR
Fuel consumption Total Dependent on chassis equipment and installed bodies
Emissions Total Dependent on reference dimension
PTO (optional) Type 31 kW with flange 31 kW for directly connected pumps
Torque at peak output [Nm] 196 Nm
Gear ratios 1:0,644 1:0,638
Engine speed at peak output 1500 rpm
POWERTRAIN
Getriebe / Allradantrieb Type Manual gearbox, 5 forward gears, 1 reverse gear
Gear ratio 5.494 - 3.193 - 1.689 - 1.000 - 0.723 Rev. 5.494
Torque split 4x4 60% front / 40% rear
Final reduction gear Ratio 4,875
CHASSIS
Front axle / rear axle Model F200TW / R035T
Load Capacity 2800 kg / 6000 kg
Tyres 205/75R17.5C 124/122 M
Single tyres at front, twin tyres at rear, tyres with optimised rolling resistance
Wheel 17.5 x 6.00 - 127 - 9t - 6 wheel bolts
Steering LHD
Recirculating-ball steering with power assist, tilting telescopic steering colum with steering-wheel lock Hydraulic
Brake Service brake with vacuum power assist, dual-circuit with load-dependent brake proportioning valve at rear wheels Drum brake
Front / rear (320 x 75.2L)/ drum brake (320 x 110)
Parking brake Mechanical expanding brake on drive shaft at rear transmission
Auxiliary brake Exhaust brake (50kW)
Suspension Front / rear semi-elliptic leaf spring with shock absorber and stabiliser
Frame Type
Fuel tank capacity 100 Litres
Electrical system – batteries 12 Volt (100 AH - 760 A(EN))

Download PDF