You need to specify the column widths.
FUSO Produktbild Canter 9C18 Duonic

Canter 9C18 Duonic 2.0

The Canter offers something you'll only find in the 10-tonne class with any other manufacturer: up to 6 t chassis load capacity in the 8.5 tonne segment. This makes it extremely easy to transport even heavy cargoes, especially as the high agility of your Canter remains unchanged.


You need to specify the column widths.
You need to specify the column widths.
Dimensions
Model Vehicle model 9C18
Cab type / crew Comfort, single cab / 3
Model variant 46839512 46839712 46839812 46839915
FUSO Modelcode FECX1EL3SEU4 FECX1GL3SEU4 FECX1HL3SEU4 FECX1KL3SEU4
DIMENSIONS mm
Wheelbase 3400 3850 4300 4750
Overall length 5975 6725 7225 7775
Cab length 1625
Width overall 2135
Cab width 1995
Height overall 2210 2205
Track width Front / rear 1665 / 1670
Frame height (at end of frame) 830 835 830
Ground clearance 185
Cab to rear axle 2875 3325 3775 4225
Cab to end of frame 4270 5020 5520 6070
Max. body length** 4985 5725 6470 7210
Frame width 850
Front overhang 1180
Rear overhang 1395 1695 1745 1845
Front axle to front of body 625
Recommended distance cab to body 100
WEIGHTS
Empty weight* 2555 2570 2605 2625
Front* / rear* 1680/875 1645/925 1680/925 1695/930
Minimum vehicle weight 2650
Gross vehicle weight / gross combination weight 8550 / 12050
Axle loads Front / rear 3100 / 6000
Towed weight Braked / unbraked 3500 / 750
Chassis load bearing capacity 5995 5980 5945 5925
CALCULATED OUTPUT
Max. speed km/h 129
Max. climbing ability (tan q)% 30
Min. turning circle (m) Kerb to kerb 12,2 13,8 15,2 16,6
Wall to wall 13,8 15,2 16,6 18,0

 

* including coolant, oil, 90% fuel, tyre sealant, tools and driver weighing 75 kg; ** calculated maximum value. Should be checked depending on the body installed and the particular application

Subject to change without notice. The information in this data sheet should be considered approximate. The illustrations may show accessories and special equipment not part of the standard specification. This data sheet may also contain models and

support services not available in certain countries.

 

FUSO Canter 9c18

You need to specify the column widths.
Engine/Drivetrain/Chassis
ENGINE (Euro VI)
Type
Water-cooled four-stroke diesel engine with turbocharger, intercooler and direct injection
No. of cylinders
4/in-line
Capacity
2998 cc
Peak output
129 kW (175 hp) / 3500 rpm
Rated torque
430 Nm / 1600 rpm
Diesel particulate filter
Service life approx. 300,000 km
Alternator
Alternating current 12V, 140A
Exhaust gas aftertreatment
DPF + SCR
Fuel consumption Total Dependent on chassis equipment and installed bodies
Emissions Total Dependent on reference dimension
PTO (optional) Tyep 31 kW with flange 62 kW with flange 31 kW for directly connected pumps
Torque at peak output [Nm] 196 Nm 392 Nm 196 Nm
Gear ratios 1:0,655 1:0,727 1:0,651
Engine speed at peak output 1500 rpm
POWERTRAIN
Transmission Model DUONIC® 2.0: Automated transmission with dual clutch, 6 forward speeds and 1 reverse gear
Gear ratio 5.397 - 3.788 - 2.310 - 1.474 - 1.000 - 0.701 Rev. 5.397
Final reduction gear Ratio 5,714
CHASSIS
Front axle / rear axle Model F350T / R035T
Load Capacity 3100 kg / 6000 kg
Tyres 205/75R17.5C 124/122 M
Single tyres at front, twin tyres at rear, tyres with optimised rolling resistance
Wheel 17.5 x 6.00 - 127 - 6 wheel bolts
Steering LHD
Recirculating-ball steering with power assist, tilting telescopic steering column with steering-wheel lock
Brake Service brake Hydraulic with vacuum power assist, dual-circuit with load-dependent brake proportioning valve at rear wheels
Front / rear Disc brake (252 x 40)
Parking brake Mechanical expanding brake on drive shaft at rear of transmission
Auxiliary brake Exhaust brake (50 kW)
Suspension Front / rear Semi-elliptic leaf spring with shock absorber and stabiliser
Frame Type Ladder-type frame with reinforcements and crossmembers
Fuel tank capacity 100 litres
Electrical system – batteries 12V-100AH (760A EN)

Download PDF