You need to specify the column widths.
6S15_l

Canter 6S15

Anyone looking for a compromise between the 3.5-tonne and 7.5-tonne segments will not only find what they are looking for in the Canter 6.0 t, but will also be surprised: with a max. chassis load capacity of over 3800 kg, it can more than double the possible payload of the 3.5-tonne model without adding to the external dimensions. The solution for every niche application.


You need to specify the column widths.
You need to specify the column widths.
Dimensions
Model Vehicle model 6S15
Cab type / crew Standard, single cab / 3
Model variant 46832212 46832312 46832512
FUSO Modelcode FEA51BL4SEU3 FEA51CL4SEU3 FEA51EL4SEU3
DIMENSIONS mm
Wheelbase 2500 2800 3400
Overall length 4635 5050 5785
Cab length 1510
Width overall 1875
Cab width 1695
Height overall 2130 2125 2125
Track width Front / rear 1390 / 1435
Frame height (at end of frame) 815 820 805
Ground clearance 165
Cab to rear axle 1975 2275 2875
Cab to end of frame 3120 3470 4270
Max. body length** 3500 3995 4985
Frame width 700
Front overhang 990
Rear overhang 1145 1195 1395
Front axle to front of body 625
Recommended distance cab to body 100
WEIGHTS kg
Empty weight* 2195 2210 2240
Front* / rear* 1465/730 1465/745 1505/735
Minimum vehicle weight 2400
Gross vehicle weight / gross combination weight 6000 / 9000
Axle loads Front / rear 2300 / 4360
Towed weight Braked / unbraked 3000 / 750
Chassis load bearing capacity 3805 3790 3760
CALCULATED OUTPUT
Max. speed km/h 141
Max. climbing ability (tan q)% 33,5
Min. turning circle (m) Kerb to kerb 10,2 11,4 13,4
Wall to wall 11,4 12,4 14,6

 

* including coolant, oil, 90% fuel, tyre sealant, tools and driver weighing 75 kg; ** calculated maximum value. Should be checked depending on the body installed and the particular application

Subject to change without notice. The information in this data sheet should be considered approximate. The illustrations may show accessories and special equipment not part of the standard specification. This data sheet may also contain models and

support services not available in certain countries.

 

FUSO Produktbild Canter 6S15

You need to specify the column widths.
Engine/Drivetrain/Chassis
ENGINE (Euro VI)
Type
Water-cooled four-stroke diesel engine with turbocharger, intercooler and direct injection
No. of cylinders
4/in-line
Capacity
2998 cc
Peak output
110 kW (150 hp) / 3500 rpm
Rated torque
370 Nm / 1320 rpm
Diesel particulate filter
Service life approx. 300,000 km
Alternator
Alternating current 12V, 140A
Exhaust gas aftertreatment
DPF + SCR
Fuel consumption Urban/ Inter-urban / Combined Euro VI: 9,8 l/100 km • 7,6 l/100 km • 8,4 l/100 km
Emissions Urban/ Inter-urban / Combined Euro VI: 257 g/km CO2 • 200 g/km CO2 • 222 g/km CO2
PTO (optional) Type 31 kW with flange 31 kW for directly connected pumps
Torque at peak output [Nm]: 196 Nm
Gear ratios 1:0,644 1:0,638
Engine speed at peak output 1500 U/Min
POWERTRAIN
Transmission Model Manual gearbox, 5 forward gears, 1 reverse gear
Gear ratio 5.494 - 3.193 - 1.689 - 1.000 - 0.723 Rev. 5.494
Final reduction gear Ratio 4,444
CHASSIS
Front axle / rear axle Model F200T / R030T
Load-bearing capacity 2600 kg / 4500 kg
Tyres 205/75R16C 113/111 Q
Single tyres at front, twin tyres at rear
Wheel 16 x 5 1/2K - 115 - 8t - 5 wheel bolts
Steering LHD
Recirculating-ball steering with power assist, tilting telescopic steering column with steering-wheel lock
Brake Service brake Hydraulic with vacuum power assist, dual-circuit with load-dependent brake proportioning valve at rear wheels
Front / rear Disc brakes (235 x 40)
Parking brake Mechanical expanding brake on drive shaft at rear of transmission
Auxiliary brake Exhaust brake (50 kW)
Suspension Front / rear Semi-elliptic leaf spring with shock absorber and stabiliser
Frame Type Ladder-type frame with reinforcements and crossmembers
Fuel tank capacity 70 litres
Electrical system – batteries 12 Volt (100 AH - 760 A(EN))

Download PDF